Dell EMC VxFlex Ready Node - Vxflex os IP Network for 2-Layer Configuration (Data 3 + Data 4)

Table 12 VxFlex OS IP network for 2-layer configuration (Data 3 + Data 4)
Item Description Comments
N Number of nodes
IP address pool
for Data 3
The pool of IP addresses used for static allocation for the following group:
l
Node_DATA3_IP = internal (interconnect) IP addresses of the VxFlex Ready
Node servers
For clarity, the second
subnet is referred to as
"Data3"
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA3_IP
Item Description Comments
N Number of nodes
IP address pool
for Data 4
The pool of IP addresses used for static allocation for the following group:
l
Node_DATA4_IP = internal (interconnect) IP addresses of the VxFlex Ready
Node servers
For clarity, the second
subnet is referred to as
"Data4"
The formula to calculate the subnet pool or subnet needs is: N*Node_DATA4_IP
Network architecture and physical connectivity for Linux servers
VxFlex Ready Node Operating System Installation Guide for Linux 33