Dell EMC VxFlex Series - Physical Server Requirements; Supported Operating Systems; Vxflex os Gateway Server Requirements; Server Physical Requirements

Physical server requirements
Table 1 Server physical requirements
Component Requirement
Port specifications
l
The following TCP ports are not used by any other application, and are open in the local
firewall of the server:
n
MDM: 6611 and 9011
n
SDS: 7072 (for multiple SDS, ports 7073-7076)
n
VxFlex OS Gateway (includes REST Gateway, VxFlex OS Installation Manager, and
SNMP trap sender): 80 and 443
n
Light Installation Agent (LIA): 9099
n
SDBG ports: MDM 25620, SDS 25640, Multiple SDS 25641-25644 (not 25640).
These ports are used by VxFlex OS internal debugging tools to extract live information
from the system for debugging purposes.
l
The following UDP port is open in the local firewall of the server:
n
SNMP traps: 162
Note
You can change the default ports. For more information, see “Changing default ports” in the
VxFlex OS Deployment Guide .
Supported operating systems
The following is a list of operating systems supported by this version of VxFlex OS.
For the most updated list, see the EMC Simple Support Matrix (ESSM) at https://
elabnavigator.emc.com/eln/elnhome.
Table 2
Supported operating systems -VxFlex OS components
Operating system Requirement
Hypervisors
l
VMware ESXi operating systems: 6.0 U3 or 6.5, managed by vCenter 6.0 or 6.5
VxFlex OS Gateway server requirements
Component
Requirement
Supported operating systems
l
Windows 2008 R2, 2012 R2, or 2016, including the Visual C++ redistributable 2010
package, 64-bit. Server Core editions are not supported.
Every server requires 2 cores and a minimum of 3 GB available RAM.
Connectivity The following TCP ports are not used by any other application, and are open in the local
firewall of the server: 80 and 443 (or 8080 and 8443).
Introduction
Physical server requirements 13