CHAPTER 2
Configuring the Hardware
The following topics describe how to configure the hardware, set BMC (iDRAC) IP
addresses, and map the ISO for servers in a VxFlex Ready Node environment.
l
Set up the BMC (iDRAC) IP address and BIOS...................................................18
l
Verify the status of the system hardware, storage controller, and disks - 14G
servers............................................................................................................... 20
l
Open the KVM console - 14G servers..................................................................21
l
Updating the BIOS, firmware and settings......................................................... 22
Configuring the Hardware 17
To Next Page
Loading...
