EasyManua.ls Logo

Dell EMC VxFlex Series - Map the ISO File on a Vxflex Ready Node 14 G Server; Prepare Esxi Servers for Deployment

Dell EMC VxFlex Series
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After you finish
Close the web browser and proceed to Map the ISO file on a VxFlex Ready Node 14G
server on page 30.
Map the ISO file on a VxFlex Ready Node 14G server
Map the ISO file on a VxFlex Ready Node 14G server.
Before you begin
Ensure that you can access the console.
Procedure
1. Open the KVM console, using the Launch link.
2. In the DELL System Setup screen, select Virtual Media > Connect Virtual
Media.
The Initializing connection screen is displayed with a connecting message.
You may have to wait for some time for the connecting message to finish.
3. In the DELL System Setup screen, select Virtual Media > Map CD/DVD.
4. From the Virtual Media - Map CD/DVD screen, browse and set up the ISO file
and then click Map Device.
5. To verify the ISO file selection, click Virtual Media and view the ISO selection
in the drop down list.
6. Reset the server:
a. In the main DELL System Setup console window, select Power > Reset
System (warm boot) to display the list of keyboard keys with related
functionality.
b. Press F11. The Boot Manager Main Menu pane is displayed.
c. Select One-shot BIOS Boot Menu. The Select Legacy Boot Option pane is
displayed.
d. Select Virtual Optical Drive.
e. Proceed to Prepare ESXi servers for deployment on page 30.
The server boots using the OS ISO file and finishes the installation.
7. If the node contains a factory-installed OS, the datastores will not be visible in
the vSphere Web Client. The BOSS card is partitioned, and the OS is installed in
the visible partition. To use the remaining storage on the BOSS card for the
datastore, perform the following steps:
a. In the vSphere Web Client, select Storage > New Datastore > Create New
VMFS datastore.
b. Select the empty partition for the datastore.
Datastore 1 is created on the empty BOSS card.
Prepare ESXi servers for deployment
Before deploying VxFlex OS on ESXi servers, you must prepare the servers.
Before you begin
Ensure that you have:
Installing the Operating System
30 Hardware Configuration and Operating System Installation Guide - ESXi Servers

Table of Contents

Other manuals for Dell EMC VxFlex Series

Related product manuals