Dell EMC VxFlex Series - Networking Pane - Vmkernel Nics Tab; Networking Pane - Port Groups Tab

12. Right-click ScaleIO_Internal and select Remove.
13. In the confirmation dialog box, click Remove.
14. In the right pane, in the Vmkernel NICs tab, right-click vmk1 and select
Remove.
Figure 2 Networking pane - VMkernel NICs tab
15. In the confirmation dialog box, click Remove.
16. In the right pane, in the Port groups tab, right-click
ScaleIo_Internal_VMkernel and select Remove.
Figure 3 Networking pane - Port groups tab
17. In the confirmation dialog box, click Remove.
18. In the Port groups tab, right-click VM Network ScaleIO and select Edit
settings.
The Edit port group dialog box appears:
19. Change the port group settings so that:
l
The name is VM Network.
l
The VLAN ID is 0.
20. Click Save port group.
Results
The ISO image has been reverted to the native ESXi image.
Installing the Operating System
Revert the AMS ESXi ISO Image to a native ESXi Image 29