Table 30. System setup options—Storage menu (continued)
Storage
Enable SMART Reporting Enables or disables Self-Monitoring, Analysis, and Reporting Technology
(SMART).
Default: ON
Drive Information Displays the information of various onboard drives.
Table 31. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Sets the screen brightness when the computer is running on battery power.
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
Full Screen Logo Enables or disables full screen logo.
By default, this option is disabled.
Hybrid Graphics/Advanced Optimus
Enable Hybrid Graphics/Advanced
Optimus (when available)
Enables or disables Hybrid Graphics/Advanced Optimus.
Default: ON.
Table 32. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Enable or disable the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Wireless Device Enable
WLAN Enable or disable the internal WLAN device.
By default, this option is selected.
Bluetooth Enable or disable the internal Bluetooth device
By default, this option is selected.
Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enabled option is selected.
HTTPs Boot Feature
HTTPs Boot Enable or disable the HTTPs Boot feature.
Default: ON.
HTTPs Boot Modes With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is enabled.
Upload Enables you to upload the CA certificate.
Delete Enables you to delete the CA certificate.
86 BIOS setup
To Next Page
Loading...
