About your monitor │ 13
Monitor specifications
Description Value
Screen type Active matrix-TFT LCD
Panel type In-plane switching technology (IPS)
Aspect ratio 16:9
Viewable image:
Diagonal
Horizontal, Active Area
Vertical, Active Area
Area
684.66 mm (27 in.)
596.74 mm (23.49 in.)
335.66 mm (13.22 in.)
200301.75 mm
2
(310.54 in.
2
)
Maximum resolution
and refresh rate
2560 x 1440 at 144 Hz (HDMI 2.1)
2560 x 1440 at 165 Hz (DisplayPort 1.4)
Pixel pitch 0.2331 mm x 0.2331 mm
Pixel per inch (PPI) 109
Viewing angle:
Horizontal
Vertical
178° (typical)
178° (typical)
Luminance output 400 cd/m² (typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Haze 25%, 3H
Backlight LED edgelight system
Response time 4 ms gray to gray in Fast mode
2 ms gray to gray in Super Fast mode
1 ms gray to gray in Extreme mode*
* The 1 ms gray-to-gray mode is achievable in the
Extreme mode to reduce visible motion blur and
increased image responsiveness. However this may
introduce some slight and noticeable visual artifacts
into the image. As every system setup and every
user’s needs are different, we recommend that users
experiment with the different modes to find the setting
that is right for them.
To Next Page
Loading...
