About your monitor │ 19
Electrical specifications
Description Value
Video input signals HDMI 600 mV for each differential line, 100 ohm input
impedance per differential pair.
DisplayPort 600 mV for each differential line, 100 ohm
input impedance per differential pair.
AC input voltage/
frequency/current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
(typical)
Inrush current 120 V: 30 A (Maximum) at 0°C (cold start)
240 V: 60 A (Maximum) at 0°C (cold start)
Power consumption 0.3 W (Off mode)
1
0.3 W (Standby Mode)
1
26 W (On Mode)
1
56 W (Maximum)
2
30 W (P
on
)
3
93.69 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Maximum brightness and contrast setting.
3
P
on
: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components
and peripherals you ordered and Dell shall have no obligation to update such
information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
To Next Page
Loading...
