Operating your monitor │ 63
This message indicates that the monitor cannot synchronize with the signal that it
is receiving from the computer. See Monitor specifications for the Horizontal and
Vertical frequency ranges addressable by this monitor. Recommended mode is
2560 x 1440.
Before the DDC/CI function is disabled, the following message is displayed:
Dell 27 Gaming Monitor
G2724D
The function of adjusting display setting using PC application will be
Do you wish to disable DDC/CI function?
disabled.
Yes No
When the monitor enters the Standby Mode, the following message appears:
G2724D
Going into Standby mode.
Dell 27 Gaming Monitor
If you press any button other than the power button, the following messages
appear depending on the selected input:
Dell 27 Gaming Monitor
G2724D
No HDMI signal from your device.
?
To Next Page
Loading...
