About this task
The following image indicates the location of the 2280 solid-state drive in M.2 slot two and provides a visual representation of the removal
procedure.
Steps
1. Remove the two screws (M2x3) that secure the solid-state drive bracket to the system board and the palm-rest and keyboard
assembly.
2. Lift the solid-state drive bracket off the solid-state drive.
3. Slide and lift the solid-state drive off the SSD2 slot on the system board.
Installing the 2280 solid-state drive in M.2 slot two
Prerequisites
If your are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 2280 solid-state drive installed in M.2 slot two and provides a visual representation of the
installation procedure.
Removing and installing components
25
To Next Page
Loading...
