Light bar
Removing the light bar
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
About this task
The following image indicates the location of the light bar and provides a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the light-bar cable from the system board.
2. Lift the light bar, along with its cable, off the palm-rest and keyboard assembly.
Installing the light bar
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the light bar and provides a visual representation of the installation procedure.
Removing and installing components
45
To Next Page
Loading...
