Steps
1. Connect the coin-cell battery cable to the system board.
2. Adhere the coin-cell battery to the palm-rest and keyboard assembly.
3. Adhere the tape the secures the coin-cell battery to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Exit Service Mode.
3. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
26
Removing and installing components
To Next Page
Loading...
