Replacing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the battery with the screw holes on the palm
rest and keyboard assembly.
2 Replace the screws that secure the battery to the palm rest and keyboard
assembly.
3 Connect the battery cable to the system board.
Post-requisites
Replace the base cover.
21
To Next Page
Loading...
