Figure 23. Installing the battery
Steps
1. Place the battery, along with the battery cable, in the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery to the screw holes on the palm-rest and keyboard assembly.
NOTE:
While installing the battery, insert the cut-outs on the battery into the hooks on the palm-rest and keyboard
assembly.
3. Replace the five screws (M2x3.5) that secure the battery to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Removing and installing Field Replaceable Units (FRUs)
59
To Next Page
Loading...
