Table 31. System setup options—Advanced menu(continued)
Advanced
Default: Enabled
BIOS Auto-Recovery
Enables BIOS to automatically recover BIOS without user
actions.
Default: Disabled
SupportAssist System Resolution
Auto OS Recovery Threshold Controls the automatic boot flow for SupportAssist System
Resolution Console and for the Dell OS Recovery tool.
Default: 2
SupportAssist OS Recovery Enables or disables the boot flow for the SupportAssist OS
Recovery tool in the even of certain system errors.
Default: Enabled
Table 32. System setup options—Security menu
Security
Admin Password Displays if the administrator password is clear or set.
Default: Not Set
System Password Displays if the system password is clear or set.
Default: Not Set
Admin Password Allows you to set the administrator password. The
administrator password controls access to the system
setup utility.
System Password Allows you to set the system password. The system
password controls access to the computer at boot.
Password Change Allows you to permit or deny system password or HDD
password changes.
Default: Permitted
Absolute
®
Allows you to track your computer
Default: Enabled
Absolute
®
Status Allows you to activate or deactivate the Absolute
®
feature
Displays if the system password is clear or set.
Default: Deactivate
WINDOWS SMM SECURITY MITIGATIONS TABLE
(WSMT)
Enables or disables configuration of platform features on
Dell Client Systems with WSMT-enabled BIOS.
Default: Enabled
Firmware TPM Enable or disable the firmware TPM.
Default: Disabled
PPI Bypass for Clear Command Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip
BIOS PPI user prompts when issuing the Clear command.
Changes to this setting take effect immediately.
Default: Disabled
TPM Security TPM 2.0 Security options.
TPM On Enable or disable the TPM Security options.
94 BIOS Setup
To Next Page
Loading...
