Steps
1. Disconnect the front-speaker cable from the system board.
2. Remove the front-speaker cable from the routing guides on the system board and palm-rest and keyboard assembly.
3. Peel the tapes securing the front-speaker cable to the palm-rest and keyboard assembly.
4. Lift the speakers and its cable off the palm-rest and keyboard assembly.
Installing the front speakers, 6-cell battery (87 Wh)
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
NOTE:
This procedure only applies if you're installing the front speaker for a computer with a 6-cell battery (87 Wh)
installed.
The following image(s) indicate the location of the front speakers, 6-cell battery (87 Wh) and provides a visual representation of
the installation procedure.
30
Removing and installing components
To Next Page
Loading...
