Removing the Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Close the display and turn the computer over.
2 Slide the battery latches to the unlock position.
1 latches (2) 2 battery
3 Pry out the battery from the battery bay.
4 Turn the computer over and open the display as far as possible.
5 Press and hold the power button for 5 seconds to ground the system
board.
12
To Next Page
Loading...
