Removing the Optical-Drive
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Follow the procedure from step 1 to step 3 in removing hard drive.
4 Remove the optical drive.
5 Remove the wireless card.
6 Remove the keyboard.
7 Remove the palm rest.
56
To Next Page
Loading...
