Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Slide the display cable through the slot on the display-assembly base.
2 Slide the tabs on the display bezel into the slots on the display-assembly
base.
3 Replace the display-assembly base on the display bezel.
4 Replace the screws that secure the display-assembly base to the display
bezel.
5 Route the optical drive and hard drive cables through the routing guides
on the display-assembly base.
Post-requisites
1 Replace the control-buttons board.
2 Replace the speakers.
3 Replace the speaker cover.
4 Replace the VESA-mount bracket.
5 Replace the system board.
6 Replace the camera.
7 Replace the microphone.
8 Replace the fan.
9 Replace the heat sink.
10 Replace the wireless card.
11 Replace the memory module.
12 Replace the hard drive.
13 Replace the optical drive.
14 Replace the back cover.
72
To Next Page
Loading...
