Replacing the microphone
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
NOTE: The left and right microphones cannot be swapped. Note the
location so that you can replace them correctly.
1 Connect the microphone cable to the microphone board.
2 Slide the microphone board into the slot on the display bezel.
3 Route the microphone cable through the routing guides on the middle
cover.
Post-requisites
1 Replace the back cover.
2 Replace the stand.
52
To Next Page
Loading...
