Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
Place the display assembly on a flat surface.
Post-requisites
1 Replace the rubber feet.
2 Replace the middle cover.
3 Replace the control-buttons board.
4 Replace the speakers.
5 Replace the speaker cover.
6 Replace the VESA-mount bracket.
7 Replace the system board.
8 Follow the procedure from step 2 to step 5 in “Replacing the camera”.
9 Replace the microphone.
10 Replace the fan.
11 Replace the heat sink.
12 Replace the wireless card.
13 Replace the hard drive.
14 Replace the optical drive.
15 Replace the back cover.
16 Replace the stand.
86
To Next Page
Loading...
