Replacing the speaker cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the speaker cover with the screw holes on the
middle cover and snap the speaker cover into place.
2 Replace the screws that secure the speaker cover to the middle cover.
Post-requisites
1 Replace the back cover.
2 Replace the stand.
67
To Next Page
Loading...
