Dell Inspiron 24 5000 Series - Removing the Camera; Prerequisites; Procedure

Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
Procedure
1 Note the antenna, microphone, and camera-cable routing and remove
the cables from the routing guides on the display bezel and middle cover.
2 Using your fingertips, press the securing clip and lift the camera
assembly.
3 Disconnect the camera cable from the camera.
4 Disconnect the camera assembly from the tab on the display bezel.
53