Removing the Memory Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the computer cover.
Procedure
1 Locate the memory-module slot (DIMM) on the system board.
For more information on the location of the memory-module slot see,
“System-Board Components”.
2 Use your fingertips to spread apart the securing clips on each end of the
memory module slot until the memory module pops up.
14
To Next Page
Loading...
