Removing the Optical Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the computer cover.
2 Remove the front bezel.
3 Follow the procedure from step 1 to step 5 in “Removing the drive cage”.
Procedure
1 Remove the screws that secure the optical drive to the drive cage.
2 Slide the optical drive out of the drive cage.
1 optical drive 2 drive cage
3 screws (4)
34
To Next Page
Loading...
