Removing the Wireless Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the computer cover.
2 Remove the front bezel.
3 Follow the procedure from step 1 to step 5 in “Removing the drive cage”.
Procedure
1 Locate the wireless mini-card.
For more information on the location of the wireless mini-card slot, see
“System-Board Components”.
2 Disconnect the antenna cables from the wireless mini-card.
31
To Next Page
Loading...
