1. power-button cable connector (PWR SW)
2. media-card reader board cable connector (SD CARD)
3. system-board power cable (ATX SYS)
4. hard-drive data cable connector (SATA1)
5. hard-drive data cable connector (SATA0)
6. M.2 2230 card slot for wireless card (M.2 WLAN)
7. coin-cell battery slot
8. PCIe x16 slot for graphics card (SLOT3)
9. PCIe x1 expansion slot (SLOT1)
10. M.2 2230/2280 card slot for solid-state drive/Intel Optane (M.2 SSD PCIE2)
11. processor slot
12. VGA-board cable connector (VIDEO)
13. processor-power cable connector (ATX CPU)
14. fan cable connector (FAN SYS)
15. memory-module slot (DIMM 1)
16. memory-module slot (DIMM 2)
Left-side cover
Removing the left-side cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
The following image(s) indicate the location of the left-side cover and provides a visual representation of the removal procedure.
10 Removing and installing components
To Next Page
Loading...
