Steps
1. Place the computer in an upright position.
2. Align and insert the front-cover tabs with the slots on the chassis.
3. Rotate the front cover towards the chassis and snap it into place.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Memory modules
Removing the memory modules
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the
components on the memory module.
The following image(s) indicate the location of the memory modules and provides a visual representation of the removal procedure.
14 Removing and installing components
To Next Page
Loading...
