• M.2 2230 solid-state drive
• M.2 2280 solid-state drive
•
M.2 2280 Intel Optane
The following image(s) indicate the location of the solid-state drive/Intel Optane and provides a visual representation of the installation
procedure.
Steps
1. Locate the notch on the solid-state drive/Intel Optane.
2. Align the notch on the solid-state drive/Intel Optane with the tab on the M.2 card slot.
3. Slide the solid-state drive/Intel Optane into the M.2 card slot on the system board.
4. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
18 Removing and installing components
To Next Page
Loading...
