Removing the palm-rest and keyboard
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Remove the wireless card.
5. Remove the coin-cell battery.
6. Remove the fan.
7. Remove the solid-state drive.
8. Remove the hard drive.
9. Remove the I/O board.
10. Remove the touchpad.
11. Remove the speakers.
12. Remove the display assembly.
13. Remove the power-adapter port.
14. Remove the power button with fingerprint reader (optional).
15. Remove the system board.
Procedure
After performing the steps in the prerequisites, we are left with the palm-rest and keyboard assembly.
38
Removing the palm-rest and keyboard assembly 65
To Next Page
Loading...
