Replacing the palm-rest and keyboard
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Place the palm-rest and keyboard assembly on a clean and flat surface.
Post-requisites
1. Replace the system board.
2. Replace the power button with fingerprint reader (optional).
3. Replace the power-adapter port.
4. Replace the display assembly.
5. Replace the speakers.
6. Replace the touchpad.
7. Replace the I/O board.
8. Replace the hard drive.
9. Replace the solid-state drive.
10. Replace the fan.
11. Replace the coin-cell battery.
12. Replace the wireless card.
13. Replace the memory modules.
14. Replace the battery.
15. Replace the base cover.
39
66 Replacing the palm-rest and keyboard assembly
To Next Page
Loading...
