3. To release the Mini PCI card assembly, spread the metal securing tabs until the assembly pops
up slightly.
4. Disconnect the assembly from the wiring harness or internal antenna.
5. Lift out the assembly and disconnect any attached cables.
Replacing the Mini PCI Card Assembly
1. Align the Mini PCI card assembly with the connector at a 45-degree angle, and press the Mini
PCI card into the connector.
2. Depending on what type of Mini PCI card you are installing, either connect the wiring harness to
the Mini PCI card assembly, or connect the mini-coax antenna cable to the Mini PCI card
assembly and to the internal antenna.
NOTICE: The connectors are keyed for correct insertion; do not force the
connections.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (13 of 52)6/21/2004 1:07:32 AM
To Next Page
Loading...
