Replacing the Video Card
1. Align the three screw holes and press down firmly on the top of the connector to seat the card
in its connector.
NOTICE: Make sure the card is correctly and firmly seated before continuing. Failure to do so
will cause intermittent video failures.
2. Replace the three screws (the screw lengths are marked on the card).
Palm Rest Assembly
Removing and Replacing the Palm Rests
1. If the computer is connected (docked) to an advanced port replicator (APR), undock it.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (35 of 52)6/21/2004 1:07:32 AM
To Next Page
Loading...
