Replacing the Display Panel
HINT: Use a magnetic screwdriver to reassemble the display panel in the
display.
1. Connect the flex cable to the two connectors on the back of the display panel.
2. Place the display panel assembly in the top cover, taking care that the flex cable is in place and
is not crushed or crimped.
3. Reinstall the M2.5 x 4-mm screw that secures the flex-cable mounting bracket to the top cover.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (25 of 52)6/21/2004 1:07:32 AM
To Next Page
Loading...
