1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard assembly.
3. Remove the hinge cover.
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer
areas on the thermal cooling assembly. The oils in your skin reduce the heat transfer capability
of the thermal pads.
4. Insert a pry stick into the latch mechanism at the left side of the microprocessor retaining clip
and pry open the clip.
5. Lift out the thermal cooling assembly.
Microprocessor Module
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (29 of 52)6/21/2004 1:07:32 AM
To Next Page
Loading...
