Dell Inspiron 8000 - Removing the Microprocessor Module

Removing and Replacing Parts : Dell Inspiron 8100
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any
installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface on the computer.
Removing the Microprocessor Module
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard assembly.
3. Remove the hinge cover.
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer
areas on the thermal cooling assembly. The oils in your skin reduce the heat transfer capability
of the thermal pads.
4. Remove the microprocessor thermal cooling assembly.
NOTICE: When removing the microprocessor module, pull the module straight up. Do not bend
the pins.
5. Remove the microprocessor module.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (30 of 52)6/21/2004 1:07:32 AM