NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in
the middle. Pressing the middle of the connector can damage fragile components.
3. Open the display and remove the two screws (marked with a "circle D") that secure the display
assembly to the bottom case assembly.
4. With the display in an upright position, lift the display assembly from the bottom case
assembly.
Display Assembly Bezel and Panel
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/8000/8000_SERVICE_MAN/remove.htm (21 of 52)6/21/2004 1:07:32 AM
To Next Page
Loading...
