34 Palm-Rest Assembly
CAUTION: Carefully separate the palm rest from the computer base to avoid
damage to the palm rest.
9
Using a plastic scribe, carefully pry out the palm-rest assembly along the
rear edge and then ease the palm-rest assembly from the computer base.
10
Lift the palm-rest assembly off the computer base.
11
Turn the palm-rest assembly over.
12
Remove the hot-key board (see "Removing the Hot-Key Board" on
page 37).
13
Remove the power button board (see "Removing the Power Button Board"
on page 41).
1 plastic scribe 2 palm-rest assembly
To Next Page
Loading...
