88 Coin-Cell Battery
Replacing the Coin-Cell Battery
1
Follow the instructions in "Before You Begin" on page 9.
2
Hold the coin-cell battery with the positive side up.
3
Slide the coin-cell battery into the slot and gently press until it snaps in
place.
4
Follow the instructions from step 6 to step 20 in "Replacing the System
Board" on page 81.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 plastic scribe 2 coin-cell battery
To Next Page
Loading...
