Center Control Cover 71
Replacing the Hinge Cover
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the two tabs on the hinge cover with the slots on the computer base
and snap the hinge cover into place.
3
Replace the two screws at the bottom of the computer.
4
Replace the display assembly (see "Replacing the Display Assembly" on
page 56).
5
Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
6
Replace the keyboard (see "Replacing the Keyboard" on page 29).
7
Follow the instructions from step 4 to step 5 in "Replacing the Optical
Drive" on page 21.
8
Replace the module cover (see "Replacing the Module Cover" on page 18).
9
Replace the battery (see "Replacing the Battery" on page 16).
1 hinge cover
To Next Page
Loading...
