74 VGA Connector Board
Replacing the VGA Connector Board
1
Follow the instructions in "Before You Begin" on page 9.
2
Align the connector on the VGA connector board with the slot on the
computer base.
3
Connect the display cable to the connector on the system board.
4
Replace the screw that secures the VGA connector board to the computer
base.
5
Replace the hinge cover (see "Replacing the Hinge Cover" on page 71).
6
Replace the display assembly (see "Replacing the Display Assembly" on
page 56).
7
Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
8
Replace the keyboard (see "Replacing the Keyboard" on page 29).
1 screw 2 display cable
To Next Page
Loading...
