24 Optical Drive
Replacing the Optical Drive
1
Follow the instructions in "Before You Begin" on page 9.
2
Slide the optical-drive assembly into the optical-drive bay until it is fully
seated.
3
Replace the module cover (see "Replacing the Module Cover" on page 18).
4
Replace the battery (see "Replacing the Battery" on page 16).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 optical-drive assembly 2 plastic scribe
To Next Page
Loading...
