Display 47
7
Make a note of the display cable and Mini-Card antenna cables routing
and remove them from the routing guides on the display back cover.
8
Turn the display panel over and place it on a clean surface.
9
Remove the display cable (see "Removing the Display Cable" on page 48).
10
Remove the display-panel brackets (see "Removing the Display-Panel
Brackets" on page 50).
Replacing the Display Panel
1
Follow the instructions in "Before You Begin" on page 9.
2
Replace the display-panel brackets (see "Replacing the Display-Panel
Brackets" on page 50).
3
Replace the display cable (see "Replacing the Display Cable" on page 49).
4
Connect the camera cable to the connector on the camera module.
5
Route the display cable and Mini-Card antenna cables through the routing
guides on the display back cover.
1 display back cover 2 display panel
3 screws (8)
To Next Page
Loading...
