58 Camera Module
Replacing the Camera Module
1
Follow the instructions in "Before You Begin" on page 9.
2
Use the alignment posts on the display back cover to place the camera
module in position and adhere it in place.
3
Replace the display panel (see "Replacing the Display Panel" on page 47).
4
Replace the display bezel (see "Replacing the Display Bezel" on page 45).
5
Replace the display assembly (see "Replacing the Display Assembly" on
page 43).
6
Follow the instructions from step 2 to step 7 in "Replacing the Palm-Rest
Assembly" on page 34.
7
Replace the battery (see "Replacing the Battery" on page 16).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 camera module cable connector 2 camera module
To Next Page
Loading...
