Hard Drive 73
Replacing the Hard Drive
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3
Place the hard drive in the hard-drive bracket.
4
Replace the four screws that secure the hard drive to the hard-drive
bracket.
5
Place the hard-drive assembly on the system board.
6
Slide the hard-drive assembly to connect it to the system-board connector.
7
Replace the two screws that secure the hard-drive assembly to the
system-board.
8
Follow the instructions from step 6 to step 16 in "Replacing the System
Board" on page 67.
1 screws (4) 2 hard-drive bracket
To Next Page
Loading...
