Display 49
Replacing the Display Cable
1
Follow the instructions in "Before You Begin" on page 9.
2
Connect the display cable to the display-board connector and secure it
with the tape.
3
Replace the display panel (see "Replacing the Display Panel" on page 47).
4
Replace the display bezel (see "Replacing the Display Bezel" on page 45).
5
Replace the display assembly (see "Replacing the Display Assembly" on
page 43).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 display cable 2 tape
To Next Page
Loading...
