Display 51
2
Align the screw holes on the display-panel bracket with the screw holes on
the display panel and replace the four screws (two on each side).
3
Replace the display panel (see "Replacing the Display Panel" on page 47).
4
Replace the display bezel (see "Replacing the Display Bezel" on page 45).
5
Replace the display assembly (see "Replacing the Display Assembly" on
page 43).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
To Next Page
Loading...
