Adding and Replacing Parts 113
Subwoofer
CAUTION: Before you begin this procedure, read the safety instructions at the front of this document
(see page 11).
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching a connector on the back panel of the computer.
If you ordered a subwoofer with your computer, it is already installed. To remove and replace a
subwoofer:
1
Follow the procedures in "Before You Begin" (see page 103).
2
Remove the battery (see page 52).
3
Remove the subwoofer from the battery:
a
Disconnect the subwoofer cable.
b
Apply a small screwdriver or scribe to the notch in the side of the battery, releasing the
subwoofer from the compartment in the battery.
subwoofer
battery
subwoofer cable
connector
cable
notch
To Next Page
Loading...
