Disassembly and reassembly
Screw List
The following table shows the screw list and the images for Latitude 3300, for different components and locations.
Table 8. Screw Size List
Component Quantity Screw type Image
• Touchpad Frame to palmrest
• System board to Palmrest
• I/O Board to palmrest
• 3
• 2
• 1
M2.0*2.0
• LCD Panel to back cover
• Touchpad Frame to palmrest
• Mis trigger Bkt to SSD
Bracket
• 4
• 3
• 2
M2.0*3.0
Hinges to LCD back cover 4 M2.5*3.5
Touchpad to Palmrest
3 M2.0*3.0 (large head)
Hinges to palmrest 6 M2.5*5.0
• LCD Bezel to back Cover
• Fan to Palmrest
• DC-in Bracket to MB
• I/O Board to palmrest
• System board to Palmrest
• Mis trigger Bkt to SSD
• 2
• 2
• 1
• 1
• 1
• 1
M2.0*4.0
Base cover to Palmrest 10 M2.5*8.0 Captive screws (Part of the
base cover)
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.
4
Disassembly and reassembly 29
To Next Page
Loading...
