Dell Latitude 3300 - Palmrest

b) fan
c) heat sink
d) memory module
e) SSD
f) WLAN card
g) battery
h) base cover
i) microSD card
7. Follow the procedure in After working inside your computer.
Palmrest
1.
NOTE:
After disassembling the system board you are left with palmrest which is one complete unit.
Follow the procedure in Before working inside your computer.
2. Remove the:
a) microSD card
b) base cover
c) battery
d) coin cell
e) WLAN card
f) SSD
g) speakers
h) i-o daughterboard
i) keyboard
j) touchpad
k) display assembly
l) memory module
m) heat sink
n) fan
o) DC-in
p) system board
3. Install the palmrest.
92
Disassembly and reassembly